Warning!! Playing with a safety restraint system can result in active air bag.
1. Make sure the condition of the car off and key removed. 2. Prepare the requisite equipment (+ Screwdriver & jumpers). 3. Open the cover of the dashboard under the steering wheel. 4. Find the MES Connector yellow color with 2 terminals. It is located under the dashboard on the right, seen from under the dash. 5. Remove connectornya 6. Connect the two terminals (jumper), I use small scissors and let cepet easy, yg pake paper clip, wire, wire, etc., according to taste it. 7. Once connected / terjumper, turn on the car until the lights dahsboard flame. (SRS light will illuminate) 8. When the SRS light off, remove the jumper. 9. After a while the SRS light will come back to life. 10. Replace the jumper after the lights they will turn on again. (SRS light will die back) 11. Remove the Jumper, the SRS light will be blinking twice indicates the process is complete. 12. Wait 10 seconds, for 10 seconds is the MES connector plug it back into place. 13. Turn the ignition key, SRS light will light up in 6 seconds and die.
No comments:
Post a Comment